Quick-Start Video Guide & Multilingual Instructions | Gliders™
G
GLIDERS WETSUIT ASSIST SYSTEM
Packaging Verified Support
STANDALONE QUICK-START & MULTILINGUAL HUB (VERBATIM V6.3)

Quick-Start Video Guides
& Multilingual User Manual

Complete digital instructions and video demonstrations for total wetsuit donning & doffing. Watch video demonstrations below, inspect the calibration scale, or select your language to view full verbatim instructions.

VIDEO DEMONSTRATIONS

01. 3-Step Quick-Start Video Guides

Direct phone & desktop playback
1. DONNING (3MM) 3mm Suits

Putting on a 3mm wetsuit using the full length of the Gliders sleeve without needing to shorten.

2. SHORTENING Key Step!

How to use dynamic shortening for thick, damp, or tight suits (4mm–7mm+) via the heel trap.

3. DOFFING (OUT) Suit Removal

Roll cuff back, apply shortened Glider over hand/foot, roll cuff down, and pull inside-out to pop free!

CALIBRATION GUIDE

02. Neoprene Thickness vs Target Letter Mark

Ruler stop guide
Wetsuit Type Thickness Target Letter Mark
Summer Shorties 3mm or less S (Skip if effortless)
3 Season Steamers 4mm / 5mm R – E
Heavy Winter & Drysuits 6mm+ / Drysuits I – G
03. CRITICAL SAFETY WARNINGS & FIT RULES
  • KNEE SAFETY RULE: The open top end of the Glider must sit below the knee joint. If material extends past the knee, it gets trapped behind the joint when bent, making removal impossible. Select the correct Glider size or adjust length so the top edge remains below your knee.
  • CRITICAL 'G' LIMIT RULE: NEVER pull past letter 'G'! Pulling past 'G' unseats the Glider completely from the cuff seal, causing bare rubber to stick to bare skin.
  • SEVERE SLIP HAZARD: DO NOT wear Gliders on both feet at the same time. Walking creates extreme instability. Use only ONE at a time.
04. FULL MULTILINGUAL DOCUMENTATION

Official Master Booklet (Verbatim Brief V6.3)

Select your preferred language tab below to read complete preparation, donning, and doffing instructions or export a PDF.

G
Gliders™ Wetsuit Assist System Designed in the UK • Made for Water Sports Worldwide
Patent Pending: PCT/IB2026/053452 | GB2605441.2
Int. Design Reg: DM/254734 (UK, EU, US, CAN, JP, CN) | AU: 202611658
EU RP: EldrisAi OÜ (Tallinn, Estonia) • compliance@eldris.ai
© 2026 GlidersUK Ltd. All rights reserved. Official Standalone Instruction Hub V6.3.
Fiber: 100% Polyamide (Nylon) Main Body • 100% Polyurethane Flap